NBH manufactures Motor control centre panels with advance enclosed, self-supporting, floor mounted, dust and vermin proof enclosure fabricated out of 14/16 CRCA steel sheet enclosure with cross linked foam gaskets on doors.
Fully Compartmentalized in design
Provisions for future extensions.
Permanent identification labels shall be provided for each compartment.
Electrolytic Grade tested Bus Bars - Copper or Aluminium as desired
Proper Earthing provided at the bottom of the panels throughout the entire length
Removable Gland plates
Permanent computerized identification labels / Ferrules provided.
Degree of Protection IP 54
Short circuit breaking Capacity of 50KA for 1 second.
MCC Panel can be designed as per the specifications given by the client
Power Distribution Boards
NBH manufactures high quality Power Distribution Boards upto 6000 Amps Main Bus. The Panels offered also conform to IP 54 degree of protection. All Panels are properly pre treated in 7 tank hot phosphating tanks & then powder coated to withstand 1000 hours of salt spray test. Some of the Salient features of our PCC's are:
Totally enclosed, self-supporting, floor mounted, dust and vermin proof enclosure fabricated out of 14G/16G CRCA steel sheet enclosure with cross linked foam gaskets on doors.
Fully Compartmentalised in design
Provisions for future extensions.
Permanent identification labels shall be provided for each compartment.
Electrolytic Grade tested Bus Bars - Copper or Aluminium as desired
Proper Earthing provided at the bottom of the panels throughout the entire length
Removable Gland plates
Permanent computerized identification labels / Ferrules provided.
Degree of Protection IP 54
Short circuit breaking Capacity of 50KA for 1 second |
